Welcome to Jinan PuYe Mechanic & Electronics Technology Co.,Ltd.

WD-P2 Series LCD screen electronic universal testing machine

 

 
Product Name: WD-P2 series LCD screen  electronic universal testing machine 
Product introduction
This series of tensile testing machine used in rubber, plastic, fabric, waterproof materials, wire and cable, wire mesh, metal wire, metal rods, sheet metal and other materials tensile test, increasing attached tools can  do compression and bending test。Having many functions such as testing force of digital diaplay 、testing speed can continuously adjustable、the samples were broken can stop automaticly and peak holding.

Functions and features

1. Speed ​​control system: AC servo motor and synchronous belt double-stage deceleration, stable and reliable performance, with protection devices such as overcurrent, overvoltage and overload. The speed range can reach 0.5~500mm/min.
2. Transmission mechanism: The transmission part adopts arc synchronous toothed belt and precision ball screw drive, which has stable transmission, low noise and high transmission efficiency.
3. attachment connection: the use of quick connection installation device, on the one hand to facilitate sample clamping, to ensure the test concentricity, on the other hand a good elimination of the impact of irregular samples on the sensor.
4. operating system: using 320 × 240 dot matrix large liquid crystal display, full Chinese menu operation, can input sample parameters and test parameters, using the latest ARM embedded system, from the amplifier, A / D converter, USB interface devices Using the latest technology, it features high precision and high resolution. The adaptive fuzzy PID control technology is used to realize the three closed-loop control of displacement, stress and strain. The test type can independently select test methods such as stretching, compression, bending, shearing, 180° peeling, 90° peeling, tearing, and the like. Test methods such as constant force value and constant elongation can also be set in the tensile test parameters.
5. automatic calibration: the system can automatically achieve the calibration accuracy of the calibration.
6. Automatic display: During the whole test, the LCD screen displays the test force, displacement, deformation, peak value, time, running state, running speed and test curve in real time.
7. Automatic control: After the test parameters are input, the test process can be completed automatically.
8. Sample judgment: After the sample breaks, the moving beam automatically stops moving, and can be manually/automatically returned to the initial position of the test.
9. automatic calculation: the test completed screen shows the test results (maximum, tensile strength, elongation, upper and lower yield and other parameters) and test curve (can display the curve in force-time, force-displacement, force-deformation, displacement -Sequential switching between curves such as time, deformation and time), optional printer can print test results and test curves.
10.automatic storage: The system can automatically store up to 511 test data, if more than 511 test data, the latter data will cover the first test data. The test results can be queried by serial number or by date.
11.limit protection: with mechanical and program-controlled two-level limit protection.
12.special attachments: in addition to the standard stretch or compression attachments, can also be equipped with special attachments according to user needs.
Main technical parameters
name WD-P2  series
maximum testing force 10kN、20kN、50kN 100kN
measuring range maximum test force of 1% - 100%
accuracy of testing force  better than ±1% of indicating value

displacement measurement accuracy

 

 better than ±1% of indicating value
Adjust speed range 0.2—500mm/min
Stretch effective space 600mm(Can be customized according to user requirements)
power 220V, 2kW
effective width   400mm 510mm
Host size 760×500×1700mm 920×700×1850mm
weight 300kg 450kg

上一篇:没有了

下一篇:WD-P1 series LCD screen electronic universal testing machine