MMH-1 Multifunction Ring Block Friction and Wear
Product Name: MMH-1 microcomputer control multi function ring block type friction and wear testing machine
Product introduction
Microcomputer MMH-1 control multifunctional ring on block friction and wear testing machine in dry friction and oil lubricated conditions to achieve rubber / metal / plastic material of friction and wear test; load, temperature, speed adjustment in time; real-time feedback on the friction coefficient, wear gap, temperature, rotate speed and so on signal acquisition; algorithm to wear test optimization.
Main structure and composition
1. This machine consists of three parts: the host computer, the electronic control system and the computer control system.
2. The host for the bedroom structure, composed of a base, spindle system, test chamber, the test force sensor, heater, temperature sensor and speed drive motor and other components.
3. The control cabinet is composed of a control cabinet, control panel, composed of electric control circuit and control system.
4. The computer system consists of host computer, display, printer, data acquisition card and interface circuit.
Technical parameters| Name | Parameters or indicators | Note |
| Ring specimen size | Φ20-Φ100 | sample material |
| Sample size | 40*40*10mm | sample material |
| Maximum load | 1000N | 1 - 100% |
| Maximum speed | 1500rpm | stepless speed regulation |
| Test speed | 1~9999 | Can be adjustable |
| Torque measurement | 0~50N.m | |
| The friction coefficient | µ=0~1 | |
| Sample temperature measurements | room temperature ~150 | |
| Dielectric slot | About 500ml | PVC material |