Q-2 Metallographic Sample Cutting Machine
Product Name: Q-2 metallographic sample cutting machine
Product Description
Q-2 metallographic sample cutting machine (hereinafter referred to as the cutting machine) is using high speed rotating thin grinding wheel to intercept the metallographic sample, it widely applicable in metallographic laboratory cutting various metal materials. Because the machine is equipped with a cooling device, used to take the cutting heat, thus avoiding the specimen is heated and change the microstructure.
Characteristics of testing machine
The cutting machine can cut all kinds of metal materials, but also can cut non metal materials such as plastic, rubber hose and so on.
The cutting machine cutting wheel is directly fixed on the motor shaft, the saw frame swing to cut the sample motor is fixed on the jaw is fixed on the base and the shaft sleeve is sheathed on the shaft of the motor, the grinding wheel by the nut and the clamping piece to be fixed. The fixed bracket is arranged in front of the motor can rotate the saw frame around the axis, by turning the handle to move the jaw clamped on the clamp seat in the sample, when the rotating frame, it can test the sample flow control knob cutting. The cooling system can be used in artificial fixed plug on the coolant is fixed on the base behind the rubber discharge tube. When the machine works, by the shell will block the grinding wheel and so on, in order to prevent coolant splash and wheel fragmentation when flying away
Technical parameter
Product Description
Q-2 metallographic sample cutting machine (hereinafter referred to as the cutting machine) is using high speed rotating thin grinding wheel to intercept the metallographic sample, it widely applicable in metallographic laboratory cutting various metal materials. Because the machine is equipped with a cooling device, used to take the cutting heat, thus avoiding the specimen is heated and change the microstructure.
Characteristics of testing machine
The cutting machine can cut all kinds of metal materials, but also can cut non metal materials such as plastic, rubber hose and so on.
The cutting machine cutting wheel is directly fixed on the motor shaft, the saw frame swing to cut the sample motor is fixed on the jaw is fixed on the base and the shaft sleeve is sheathed on the shaft of the motor, the grinding wheel by the nut and the clamping piece to be fixed. The fixed bracket is arranged in front of the motor can rotate the saw frame around the axis, by turning the handle to move the jaw clamped on the clamp seat in the sample, when the rotating frame, it can test the sample flow control knob cutting. The cooling system can be used in artificial fixed plug on the coolant is fixed on the base behind the rubber discharge tube. When the machine works, by the shell will block the grinding wheel and so on, in order to prevent coolant splash and wheel fragmentation when flying away
Technical parameter
| Max cutting diameter | 30mm |
| Grinding wheel size | 250 * 2 * 32mm |
| Speed | 2800r/min |
| Dimensions | 650 * 450 *400mm |
| Motor | 1.1Kw 380V 50Hz |
| Weight | 60kg |