Product Name:  XQ-2B metallographic specimen mosaic machine  
Product Description
XQ-2B metallographic specimen mosaic machine (hereinafter referred to as the inlaying machine) applicable to not plastic, is not easy to get small metallographic specimen of thermoset pressing. After forming can be conveniently sample polishing operation, but also beneficial in metallographic microscopy of microstructure determination.
Product details
The mosaic machine can reliably work under the following conditions:
1. the altitude is not more than 1000 meters;
2. ambient medium temperature is not more than 40 degrees Celsius, not at the end of -10 degrees celsius;
3. air at relative humidity of not more than 85% (at 20 degrees Celsius);
4. there is no obvious vibration and significant turbulence;
5. there is no dust, explosive gas, and corrosive gases which can seriously damage the metal and insulation.
Characteristics of testing machine
This machine mechanical inlaying machine and the outer wheel of the rotating body, through a pair of bevel gear drive body faucet rod which move in a rigid die sleeve pressing specimens of the lower die, heat due to plastic with embedded specimen specimen in heating conditions forming. Sample preparation in the process of forming pressure by fixed in the collective in the spring automatic compensation and compacted specimens of pressure can be indicated by the signal lamp to give.
The embedded machine is equipped with a digital display temperature controller, so as to realize the real-time display of temperature and temperature independent set, timer configuration, so as to realize the semi automation of sample preparation, greatly improving the work efficiency. 8-10 minutes per mosaic sample preparation time can obtain smooth as a mirror of the ideal specimen.
Technical specifications:
1. sample press specificationsΦ 22 * 15mm ; Φ30 * 15mm; Φ45 * 18mm
2. heater specifications 220V 650W
3. temperature regulation range 100-180℃
4. control power supply voltage fluctuation is not greater than 15%, 220V, 50Hz
5. exterior dimension 340*270*400mm
6. net weight 33Kg.
Working conditions and environment
The mounting machine works reliably under the following conditions:
1. The altitude does not exceed 1000 meters;
2. The temperature of the surrounding medium does not exceed +40 degrees Celsius, not below -10 degrees Celsius;
3. The relative humidity of the air is not more than 85% (at 20 degrees Celsius);
4, no obvious vibration and bumps;
5. There are no conductive dust, explosive gas, and corrosive gas that can seriously damage metal and insulation.